 |
| Stop Condensation |
Are you trying to get rid of those ungainly moulds on the
surfaces of your home? Well, they are probably there due to condensation within
the home and the good news is that you have several means at your disposal to stop condensation.
How does Moulds Form?
In damp
or cold weather conditions, such as those prevalent in the UK
 |
| Cavity wall insulation |
Normally, water
vapour needs to escape but when it meets a cold surface; it gets condensed into
droplets of water. Moulds thrive in such conditions and often appear as
pinpoint black spots that can be seen on side walls, corners and poorly
ventilated areas such as behind wardrobes and cupboards. The worst affected
buildings are the ones which are clad in sheet metal. Dripping wet roofs that
soak everything beneath are the result of condensation. In order to Stop Condensation,
you may take the help of several procedures. The best way to counter it is by
having Dehumidifiers run 24/7 to soak in all the moisture but this can turn out
to be very expensive to maintain. A cheaper alternative would be having a Cavity Wall
Insulation system
sprayed by which a layer of insulation would be installed directly under the
roof. This will provide a warm surface on the inside that prevents water vapour
from forming and reaching the cladding.
No comments:
Post a Comment